Tail Light Power Adapter T-HARNESS for Polaris Ranger / General 4 Pin connector ONLY

$23.00

-

    4 Pin T Adapter - Running Light Pig Tail ONLY - Gives you keyed ignition source at the rear. Whatever accessory you have connected to this will come on and off when the running lights are on
    4 Pin T Adapter - Running Light & One Brake Adapter - (Can be used to hook up a license plate light and a third brake light)
    4 Pin T Adapter - Both Brake Outputs (Used with TurnSignals L & R) - Adds a pig tail for Brake / Turn L and R if you have a turn signal kit installed)

View cart

Description

This Power Adapter T- harness is designed to add Plug and Play accessories to your OEM lighting system.  Depending on the option you select determines what power functions these provide.  Uses range from lighted plate frames, whips, brake lights, turn signals taps and more.  Installation requires you to unplug the oem tail light harness and place this adapter right in line.  Zero cutting or splicing of any wires. Makes for a clean and professional installation.

NOTE: This harness has nothing to do with Reverse lights.  See separate listing for that option.

Do not hook up HIGH amperage accessories.  The OEM wiring system only uses a 10 amp fuse.  If you pop the fuse you must add a relay setup with the pig tail wires being the relay trigger.  NEVER increase the size of the fuse unless you want to watch your machine burn to the ground.

 

  • OEM Style plugs
  • Roughly 12″ Pig tails.
    • Black or Brown is Ground
    • Orange Brake Lights
    • Orange Brake Lights
    • Red Running Lights – ( main wire used for keyed ignition source for accessories)

 

  • Polaris General UTVs
  • Polaris Ranger 4 Pin connector only.  If you need 3 pin or 8 pin please call us.

Installation Tips

  • Plug directly into brake lights harness on most vehicles.
  • Plug under rear of tilt bed on Polaris General UTVs.