SPEED TURTLE 2.0 EASY FLASH MODULE
$149.00
-
- Description
Description
SPEED TURTLE 2.0 EASY FLASH MODULE
The Speed Turtle 2.0 Easy Flash Module is a small, easy to use vehicle exterior light flasher. It plugs into your vehicle’s OBD-II port and make select factory lights flash in a variety of flash patterns. The system is easily installed in minutes and is a true plug and play solution for most vehicles.
The SpeedTurtle module will not damage the vehicle and can be removed at any time. Unlike other solutions, the SpeedTurtle Module does not require any cutting or reconfiguration of the vehicle’s wiring harness. This allows the module to easily be removed and installed in another vehicle without repairing or replacing vehicle components.
Utilizing the free software you can program the module to change patterns, park mode flashing and much more. Periodic firmware updates will be available and you can always update your module to work with the latest vehicles. Although you are required to select your vehicle at checkout, the module is not vehicle specific and you can switch the module between vehicles.
Double The Supported Lights
EFM 2.0 has the ability to flash more lights with finer control than ever before.
Multiple Flash Patterns
Gone are the days of a standard flash pattern. EFM 2.0 allows the user to select from one of 10 unique patterns.
Variety Of Activation Options
EFM 2.0 provides two switch inputs as well as the ability to activate the module using pre-existing vehicle buttons.
Custom Configurations
Select specific lights and patterns for every activation option.
Park Mode
Change patterns or disable specific lights when in park.
Vehicle Integration
Included headlamp, turn signal, reverse and brake lamp overrides ensure normal vehicle light operation is unaffected.
Toggle Switch Harness: This harness provides a simple ON/OFF toggle switch with adhesive backing. There are two internal LEDs to the toggle switch with green indicating the switch is ON and orange indicating the switch is OFF. While this is the simplest of the two harnesses to install, it only provides one of the two possible switch inputs. The toggle switch harness is connected to Input 1 on the module.
Voltage Input Harness: This harness provides two ‘flying lead’ input wires. Each wire will accept a 5 – 17 volt input signal from a switch or light controller of your choice. The white wire corresponds to Input 1 and the green wire corresponds to Input 2.
Unlike other solutions, the SpeedTurtle Module does not require any cutting or reconfiguration of the vehicle’s wiring harness. This allows the module to be easily installed by anyone in minutes. The plug and play installation also allows the module to be removed and installed in another vehicle without repairing or replacing vehicle components.
The module has two switch inputs as well as an existing vehicle button (most vehicles) that can be configured to activate the module either through a long press or quick cycle.
*Park only vehicles will only flash while the vehicle is in Park. This currently includes the Ford F150 and Ford Explorer.
