Availability: 5 in stock (can be backordered) SKU: L71D1GCWIPER



This switch has 3 positions, OFF, WIPER ON, and Momentary Spray. The words Wiper on the bottom lights up all the time for backlight illumination. Blue/ Blue Leds

Seal Protection

  • Locks out elements such as water, dust & debris. Certified to IP67 for front panel components.

Switch mounting

  • Fits into industry standard mounting hole of 1.734 x .867 in [44.0mm x 22.0mm].

Panel Thickness Range

  • Acceptable Panel Thickness

.030 to .156 (.76mm to 3.96mm)

  • Recommended:

.030, .062, .093, .125 and .156

Switch Depth

  • Switch only from base to terminal end – 1.75 inches
  • Switch with LC1-01 attached – 2.38 inches

Switch dimension

  • Base with rocker installed – 1.97 X 1.02 inches


Lower LED is independently wired.  If connected this will light up the WIPER text. We recommend wiring up to keyed ignition or the orange wire off the headlight switch.

Rated 20A 12V

No rear barriers between terminals. LC1 housing connectors can be used with Packard 630 terminals.  LC1 connector and terminals are sold separately.

Insulated 1/4″ female quick disconnect terminals can also be used.  This is a 4 terminal switch with a common ground for both LEDs