LH1-01

L-SERIES, CUSTOM SWITCH DESIGN, LOWER LED INDEPENDENT ON/OFF

$18.25

-

Availability: Available on backorder
View cart

Description

 

THIS ITEM IS PERMENTLY PUT ON OUT OF STOCK.  YOU MUST CONTACT US IN ORDER TO PURCHASE. FEW REASONS.

  1. YOU CAN NOT SEND US COPYRIGHTED MATERIAL.
  2. DEPENDING ON WHAT THE PICTURE IS, IT MAY HAVE AN UPCHARGE.
  3. IT CAN NOT BE PURCHASED FOR OVERNIGHT

 

 

Don’t see the switch design you want? Create it yourself.  We can laser etch the design and words you want on your switch.  Just upload your file and the text you want for a full custom look.  Because of the size of the switch and space, we are limited to what can be etched. The simpler the design the better. Picture on TOP, Words on BOTTOM.
  • If you do not upload a design, we will pick something generic and close to what your words mean.  Switch can not be refunded if you are not happy with the image we pick.  If you have any questions please contact us directly before ordering.

Seal Protection

  • Locks out elements such as water, dust & debris. Certified to IP67 for front panel components.

Switch mounting

  • Fits into industry standard mounting hole of 1.734 x .867 in [44.0mm x 22.0mm].

Panel Thickness Range

  • Acceptable Panel Thickness

.030 to .156 (.76mm to 3.96mm)

  • Recommended:

.030, .062, .093, .125 and .156

Switch Depth

  • Switch only from base to terminal end – 1.75 inches
  • Switch with LC1-01 attached – 2.38 inches

Switch dimension

  • Base with rocker installed – 1.97 X 1.02 inches

SPST ON/OFF switch.

Upper LED is ON when the upper part of the rocker is pressed ON.  This will light up the symbol area.

Lower LED is independently wired.  If connected this will light up the text area.

Rated 20A 12V

No rear barriers between terminals. LC1 housing connectors can be used with Packard 630 terminals.  LC1 connector and terminals are sold separately.

Insulated 1/4″ female quick disconnect terminals can also be used.  This is a 4 terminal switch with a common ground for both LEDs