Looking for Reverse lights for the Polaris Ranger? Search no more! With our kit it makes adding reverse lights a breeze. 100% Plug & Play wiring, requires no cutting of factory wiring. Light Bar mounts With or without Factory Exhaust on the back all made in the USA. Please verify which version relay kit you need. Early Model 2018 Ranger 1000 and Early Model 2019 Ranger 900 will have two wires located next to the throttle body as seen in the gallery pictures. Late Model 2018+ Ranger 1000 and Late Model 2019 Ranger 900 will have OEM connector plug.
We have 2 optional versions available; See separate listing as this one is for the HUNTERS Edition ONLY. The Hunters Edition Reverse Light kit comes with a special made relay harness and 3 position switch. OFF , AUTO, and REVERSE. This kit is completely different than our original kit.
- OFF POSITION – Completely kills the reverse light regardless of what gear you have the rig in.
- AUTO POSITION – Reverse light will come on ONLY when shifted into Reverse Gear.
- REVERSE POSITION – Reverse Light Illuminates on the switch; Reverse light is on no mater what gear you have it in as long as the key is in the ignition. Will not work without the key.
This kit only works on Rangers with OEM reverse light connections. 500 and 570 do not have the oem reverse light wiring. You can purchase the kit but will need a separate wiring harness for manual switch operation. Before ordering, check to see which version you have. If you need any assistance in finding out which version to order feel free to give us a call or message us on Facebook.
You have two options when it comes to the light source;
- Diode Dynamics 6″ Light bar is the best and brightest.
- Total Power: 26.6 watts
- Current Draw: 1.9 amps @ 14V
- Peak Intensity: 47,000 candela
- Intensity @ 10m: 470 lux (Driving)
- Raw Output: 2280 lumens
- Measured Output: 1400 lumens
- Output Color: 6000K Crisp White
- Total Dimensions: See images above.
- Weight: 1.3 lbs
- Connector: Deutsch DT
- 8 YEARS WARRANTY
- XKGLOW 2-IN-1 LED LIGHT BAR | WHITE & GREEN
- DUAL Color – White and Green
- Spot/Flood Combo for ultimate visibility
- 10″ – 24watt, 2700 lumens / 20″ – 48watt, 5400 lumens
- Free switch+wiring harness included
- Low Profile – Only 1.25” deep
- 12-24V DC input
- Switching from White to Green is as easy as pressing the on/off button twice
- Two Sizes: 10in or 20in
- Relay Install Time: 5-30 minutes PLUG & PLAY
- Light Bar Install Time: 30 minutes ( Requires two holes to be drill on rear cross support)
- NOTE: Toggle switch version is Negative Triggered and needs to be hooked up to Ground.
- Ranger 2016-2018 Early Model Installation
- Ranger 2018+ Late Model Installation Instructions
- 1 x Reverse Light Relay Kit ($45.99 ) Made in USA
- 1 x Front Harness to Switch ( 3 Seater $7.99, Crew $12.99)
- 1 x Reverse Light ($ See Options)
- 2 x Custom Brackets (USA STEEL) Made in USA ($25.00)
- 1 x 3 Position Switch – OTRATTW Switch- OEM STYLE ($25.99)
- 1 x Mounting Hardware