GMC SIERRA / CHEVROLET SILVERADO 1500 / 2500 REAR INTERIOR BRACKET

NOTE: WE HAVE UPDATED FITMENT AND PART NUMBERS 

GMC SIERRA / CHEVROLET SILVERADO 1500 / 2500 REAR INTERIOR NO CUT / NO DRILL BRACKET

Looking to make a UC, Unmarked or even a Marked Sierra / Silverado 1500 but wants some rear hidden lights?  This bracket is perfect for hiding lights inside the rear glass. Upper bracket uses factory existing holes.

• Can fit up to 10 mPower 4 or 4×2 / 4 Whelen Mega-T / 8 Whelen Mini ION-T, ION-T and Stud Versions. Slider version fits 8 TC6 Modules, Non Slider fits 6 TC6 Modules
• New bracket style may feature KNOCK OUTS. You will have to Knock Out the location you want the lights to mount.  Put in order NOTES you want KNOCK OUT version as we are still going thru older versions that is not the KNOCK OUT style. Also include the number of lights you are installing as we can cut out the exact number you plan to use. 
• OTHER BRAND OF LIGHTS CAN ME MADE BY REQUEST. CALL US DIRECTLY TO INQUIRE

REAR UPPER BRACKET WITH SOLID REAR WINDOW
1.  Remove the two cloth hanger hooks mounted on the headliner above rear seat.
2. Remove rear C Pillar Panels
3. Remove  B Pillar Panels
4.  Slowly Drop down the rear section of the headliner. Drivers side will have a factory harness that needs unplugged to allow the headliner to drop down farther.
5. Install the Rubber trim seal on the mounting bracket using black silicone RTV.
6. Install the Lights on the bracket, If installing the TC6 or ION-T lights, use the supplied 3D Printed wire spacers
7. Route all the wiring needed for the lights bar as the C Pillar Side Panels needs to be reinstalled before the lightbar bracket can be installed.  If you try to install the lightbar bracket first before the C Pillar Panels, you will end up scratching the panels on the edge of the bracket.
8. Mount the bracket to the vehicle. Each side has 2 factory holes that line up with the bracket. Make sure the bracket is pushed up against the rear window and that the metal on each mounting foot is flush with the vehicle.
9. The headliner can be pushed back into place without modifications

REAR UPPER BRACKET WITH SLIDER REAR WINDOW
1.  Remove the two cloth hanger hooks mounted on the headliner above rear seat.
2. Remove rear C Pillar Panels
3. Remove  B Pillar Panels
4.  Remove A Pillar Panels and Visors. Remove anything else holding the headliner up.
5.  Slowly Drop the headliner. Drivers side rear will have a factory harness that needs unplugged to allow the headliner to drop down farther.
6. Install the Rubber trim seal on the mounting bracket using black silicone RTV.
7. Install the Lights on the bracket, If installing the TC6 lights, use the supplied 3D Printed wire spacers
8. Route all the wiring needed for the lights bar as the C Pillar Side Panels needs to be reinstalled before the lightbar bracket can be installed.  If you try to install the lightbar bracket first before the C Pillar Panels, you will end up scratching the panels on the edge of the bracket.
9. Mount the bracket to the vehicle. Each side has 2 factory holes that line up with the bracket. Make sure the bracket is pushed up against the rear window and that the metal on each mounting foot is flush with the vehicle.
10. Reinstall the headliner starting at the rear.  The headliner will have to be modified. Cut slits for the lightbar mounting bracket.

• 1 x Fitted Upper  GMC SIERRA / Chevrolet Silverado 1500/2500 BRACKET
• LIGHTS IS NOT INCLUDED. SEE SEPERATE LISTING

• 2019-2026 CHEVROLET SILVERADO 1500
• 2019-2026 GMC SIERRA 1500
• 2020-2026 CHEVROLET SILVERADO 2500
• 2020-2026 GMC SIERRA 2500