BUILD-A-KIT Plug & Play Turn Signal Kit for 2012-2020 Polaris Ranger

TurnSignalKit
TurnSignalWiring
TurnSignalKit1
TurnSignalIndicators
IndicatorWiring

BUILD-A-KIT Plug & Play Turn Signal Kit for 2012-2020 Polaris Ranger

$229.99

    • $

    On the 2019/2020 Polaris Ranger 1000, Polaris offered a pre-wired and Non Pre-Wired Ride Command Setup. You need to check which setup you have before placing this order as one version has a 4 pin connector while the other is a 8 pin connector.  To find which style you have, lift up the back bed. Right next to the throttle body in the middle you will have a connector that runs to the bed that will split to both taillights.  That connector will either have 7 0r 4 wires coming out the plug.

    On the 2018 Polaris Ranger 1000, Polaris made a mid year change to the OEM wiring. If you have the Early Year 2018 Ranger, you will have the 3-PIN Taillight harness. If you have the Late Year Ranger, you will have the 4-pin taillight harness.  PLEASE CHECK which taillight harness you have before ordering as they are both made different. 

Description

BUILD A KIT ACL Plug & Play Turn Signal Kit for 2012-2020 Polaris Ranger

All orders are made in house. Please allow few days delay depending on version ordered.  Ship time is between 3 days-14 days.  

Hand signals is a thing of the past. Most modern day drivers think you are waving at them instead of turning.  Automotive Custom Lighting is proud to announce our newest product line up for the Polaris Ranger; Plug & Play Turn signal Kit.  Designed and made right here in Arizona, USA.

“Don’t be like Jim and almost get ran over when someone thought he was waving instead of turning!” 

          We are all about hearing the voices of the community at events and social media. Looking around at all the current turn signal kits on the market we saw a bunch of improvements we could offer to our customers. The most common thing we found is the front turn signals was sub par to our standards. We want something that can be seen on the road instead of something the size of a dot. Safety on the road is our main concern coming from an avid motorcycle rider.

Our kit features newly designed front turn signal light pods. We took two emergency roadside LED lights, modified the programming to make them usable for turn signals, making them perfect for this application; not too big and not to small. Topped off with our fully 100% Plug and Play wiring. Zero cutting or modifying of any factory wiring. Direct plug into the OEM taillights and Bus/Pulse Bar. This system only uses the factory brake light switch, everything else is independent. Added in the tail light harness as an option is the licence plate light pigtails with spade connectors ready for use.

  • Dash Mounted Directional Indicators (OPTION OEM INDICATIORS COMING SOON 2020)
  • Steering Column Mounted Lever w/ Hazard Switch for simple operation
  • Plug & Play Weather Proof Wiring and Connectors
  • No Cutting or Splicing into Wiring
  • Uses pre-existing OEM tail lights so your not adding additional rear lighting
  • Adds front Amber LED pod lights that are better and brighter than your basic dot lights.
  • See side option for more info
  • Made in Arizona, USA

Ever feel embarrassed leaving your turn signal lights on for miles? Don’t worry it has happens to the most of us, out of sight, out of mind. We got you covered with our two bright dash mounted arrow indicators to let you know your still turning.  The turn signal lever is mounted to the left of the steering wheel and is similar to your standard vehicle operation with built in 4-way Hazards. Unlike other Turn Signal kits that claim wouldn’t that switch get in the way of getting in or out? NO! This turn signal switch has been big guy tested; 6’8 260LBS approved. With the custom made bracket make sure it stays out of the way an strong enough to make sure it goes no where.    See below for additional options.

 

All our kits are made in house. If you have a bright idea or want a kit customized to your needs, feel free to message us up. Our goal is to provide the best product backed with our amazing customer service.  If you feel that we have not met that goal, please contact us to make sure we can get you squared away.  Now on to the good stuff;

  • 2 x Front Turn Signal Pods
  • 1 x Front Wiring Harness to Bus/Pulse Bar
  • 2 x Dash Mount Turn Signal Indicators
  • 1 x Turn Signal Switch Lever
  • 1 x Turn Signal Switch Mounting Bracket w/ Hardware
  • 1 x Mid Section Wiring Harness
  • 1 x Replacement Tail Light Harness (2012-2017 Model)

  • 2020 POLARIS RANGER  ALL OPTIONS
  • 2019 POLARIS RANGER 900 XP ALL OPTIONS
  •  2019 POLARIS RANGER 1000 XP ALL OPTIONS
  •  2019 POLARIS RANGER CREW 1000XP ALL OPTIONS
  • 2018 POLARIS RANGER CREW 900 ALL OPTIONS
  • 2018 POLARIS RANGER 900 XP ALL OPTIONS
  •  2018 POLARIS RANGER 1000 XP ALL OPTIONS
  •  2018 POLARIS RANGER CREW 1000XP ALL OPTIONS
  • 2017 POLARIS RANGER CREW 900 ALL OPTIONS
  • 2017 POLARIS RANGER 900 XP ALL OPTIONS
  •  2017 POLARIS RANGER 1000 XP ALL OPTIONS
  •  2017 POLARIS RANGER CREW 1000XP ALL OPTIONS
  • 2016 POLARIS RANGER 900 XP ALL OPTIONS
  • 2016 POLARIS RANGER CREW 900 ALL OPTIONS
  •  2016 POLARIS RANGER 570, 570 XP, FULL SIZE
  • 2016 POLARIS RANGER 570, 570 XP, FULL SIZE CREW
  • 2015 POLARIS RANGER 900 XP ALL OPTIONS
  •  2015 POLARIS RANGER CREW 900 ALL OPTIONS
  •  2015 POLARIS RANGER 570 FULL SIZE
  •  2015 POLARIS RANGER 570 EFI FULL SIZE CREW
  • 2012-2020 Polaris Ranger

 

 

Need help with installation? Come by if your in Arizona or Contact one of our authorized installers in your area today.

Check out one of our professional installers near you! Click Here!

*DISCLAIMER – PLEASE READ BEFORE PURCHASING*

Under no circumstances will Automotive Custom Lighting be liable for any damages, direct or indirect, consequential or compensatory, arising out of the use of
this product. Our products are fully tested for the intended use described above. Any issues, damages, injuries, or malfunctions resulting from user-error or during
use or installation will not be warrantied or covered by any means under Automotive Custom Lighting LLC. This product is Pantent Pending. Purchasing this product you agree to not duplicate. With the purchase any of our products you hereby understand and agree to these terms. Light bar do not come with brackets.  You are only purchasing  just the brackets needed to install the light bar. See our other listings for package deals.

Reviews

There are no reviews yet.


Be the first to review “BUILD-A-KIT Plug & Play Turn Signal Kit for 2012-2020 Polaris Ranger”

Make Model Year
POLARIS RANGER 2012 - 2020