View cart


LEGENDARY: The FX-R 3.0 is a retrofitters delight with its high precision castings, advanced optics, and available 2.5″ and 3″ clear lens. It all adds up to put the Morimoto FX-R 3.0 near the top of the lighting totem poll. If you’ve got the balls to cut up your headlights in order to retrofit them, you won’t be let down.

WELL-ROUNDED: When you consider a full size projector on the basis of light output, out of the box readiness, fitment in most applications, and value; the FX-R easily takes the cake.

INSTALLATION SUMMARY: Park car, mark stock beam-height on wall, disassemble headlight, cut original reflector to fit projector in place, re-mount modified headlights without lens cover, illuminate projector, then tack it into place using the reference height/level using epoxy gum. Check out the installation procedure linked above.

PERFORMANCE HIGHLIGHTS: More light! With a pre-installed clear lens and DOT stepped cutoff shield that’s been tuned in-house, the FX-R 3.0 is a stand out. Their advanced internal optics create a wide beam pattern with a uniform distribution of light that cuts through darkness like a laser. They have one of the straightest, sharpest, and most vibrantly colored cutoff lines of any projector in existence and a high beam that will penetrate for hundreds of yards.

TUNED UP: Each Morimoto projector is individually tested and hand-tuned to perfection to ensure nothing but the best output. Spend a few bucks less with other sellers on eBay and get the units we turned down.

USER-APPROVED: By satisfied enthusiasts with all kinds of cars and trucks. With a quick and easy search we pulled up install examples (1,2,3,4,5,6,7) of the Morimoto FX-R 3.0 Projectors! If you’re looking for inspiration for your retrofit, keep reading!

  • PROJECTORS: 2x LHD Morimoto FX-R 3.0 Bi-Xenon
  • SOLENOID INPUTS: 2x 9006 Male Sockets
  • WARRANTY: 3 Years

  • APPLICATIONS: Universal (cars/trucks/motorcycles)
  • MODIFICATIONS REQUIRED: All headlight housings
  • BULBS: D2S HID Only (Osram 66040 will not fit)
  • SHROUDS: All Except Mini Gatling/Graphite (may require trimming)
  • CENTRIC RINGS: 2.5″ Model Needs FX-R 3.0 model for Shrouds.

  • DEPTH: 140mm (2.5″ model) or 155mm (3.0″ model)
  • WIDTH: 112mm
  • HEIGHT: 95mm
  • LENS DIAMETER: 2.5 or 3.0 Inches
  • FUNCTIONALITY: Low and High Beam (Bi-xenon)
  • COMPATIBLE WITH: 35W and 50W HID Systems
  • STANDARD LENS: 100% clarity “Kuria Optic” glass