Description

ACL 2016-2023 Dodge Ram1500 CLASSIC mPower Side Rear Door Brackets

Looking for an easier way to mount mPower Lights to the rear door on your Dodge Ram 1500?  Search no more! Our custom designed brackets fit perfect BEHIND the plastic trim panel making for a clean installation.  Perfect for personal vehicles or undercover units. Designed for SoundOFF Signal 3, 4, or 4×2 lights.  NOTE: IF ORDERING POWDERCOATED BRACKETS, IT MAY REQUIRE EXTRA TIME TO GET THEM COATED. IF YOU ARE IN A PINCH FOR TIME, PLEASE REACH OUT TO US DIRECTLY. IF ORDERING LARGE QUANITIES THE WEBSITE MAY NOT QUOTE CORRECTLY ON SHIPPING. EXTRA SHIPPING MAY NEED TO BE COLLECTED ON BULK ORDERS. 

CHECK OUT THE DEMO VIDEO ON OUR TIKTOK

1. Remove Side cover Panel, 3 metal/ plastic clips. (Note you will most likely lose the bottom clip in the door. If so it falls down to the bottom by the drain holes.
2. Place bracket, square notch matches oem rectangle hole bottom side of it. The angle is slightly off on this production batch.  Top of bracket may require slight bending so that it does not dig into the oem rubber seal.  See attached pictures.
3. Only 2 holes need to be drilled if using rivnuts.  If using self tapers we recommend using all three.  Mark the holes with a sharpie.
4. If using rivnuts we recommend using M6 with 23/64 drill bit.
5. Mount your lights and Secure the wiring.  Bolt the bracket on
6. Reinstall the oem cover panel.
   VIDEO INSTRUCTIONS COMING SOON TO OUR YOUTUBE

• Pair of Mounting Brackets (Hardware sold separate)

• 2016-2018 DODGE RAM1500
• 2019-2023 DODGE RAM1500 CLASSIC ONLY