2pc 7″ Jeep RGB Halo LED Headlight Kit with XKchrome Smartphone App-enabled Bluetooth Jeep JK TJ
If you already have an XKchrome Controller, click HERE to order.
- 1pc XKchrome BLE 4.0 app controller. Click here for detailed instructions
- 2pc 7″ LED Headlight w/ RGB Halo.
- ON/OFF switch wire.
- Detailed mounting instructions
Built with 16 bit gamma correction, XKchrome provides over 16 million vibrant colors, allowing the user to choose any color with a single tap. Each controller has two zones that can
simultaneously run different colors and patterns, allowing more room for creativity and uniqueness compared to other RGB LED lights. Up to 6 controllers (12 zones) can be connected at the same time.
At XKGLOW, we never stop pushing the boundaries. With the latest app update, XKchrome can seamlessly transit lights from one color to another and tune the light brighter as you
move faster, turning your vehicle into a beast that breaths light! All these new features updates are free so you can get the most out of XKchrome with your imagination.
Music is the essence of life; and we make it the essence of light. XKchrome’s Music Sync feature enables lights to dance with the rhythm of any song in your phone, or with any sound
picked up by the microphone. To maximize visual effect, our adaptive algorithm dynamically adjusts the volume sensitivity. No matter if it’s a country music or a hard rock, just lay
back and enjoy the full spectrum you defined for your favorite song.
With XKchrome’s realtime “chameleon” feature, you can paint your ride with any color you see. Whether it’s a bright shirt or a stunning paint job, just point your phone’s
camera to it. XKchrome instantly turns your headlights into the very same eye-catching color, without even a finger tap. Prepare to be AWED!
Our color designer hand-picked over 15 themes for special occasions throughout the year. It even comes with an “emergency pattern” in case you parked at the side of the
road in the dark. In addition, users can fully customize their own themes with various pattern, speed, and up to 10 color combinations.
XKchrome can do more than lighting. Thanks to its built-in Bluetooth Smart Beacon, XKchrome helps locate your parked vehicle. When you walk away after parking, XKchrome
app will automatically pin down your location. So that you can easily look it up in the app when you need to find the way back. Once you get close enough, you can also turn on
the lights to single your vehicle out from the endless parking row.
- iOS device compatibility: iPhone 4S or higher; iPad 3 or higher; iPad Mini or higher, iPod Touch 5th gen or higher.
- Android device compaibility: Must be equipped with Bluetooth 4.0 (BLE) and Adnroid 4.4 or higher version system. Check if your phone is BLE equipped >>
- Controller Max load: 3A per zone. (Each controller has 2 zones)
- Light power consumption: 0.56A (6.72W)
- Low Beam- 26W High Beam- 40W
- Controller Input votale: 9-15V DC.
- Reversed polarity protection: Yes.
- Transient votalge supression: Yes.
- Controller Dimension: 4″ x 2.33 x 0.73″ (100 x 60 x 19cm)
- Applications: Jeep JK & TJ Models
Turn Signal Upgrade Module Features:
- Turn signal: When the yellow sensor wire is activated by turn signal, the lights connected to the module will blink with turn signals, with or without the accent lighting being turned on.
- White light: when the white sensor wire is activated, the connected lights will change to solid white. The white wire can be attached to various signal sources such as headlight, reverse light, or door courtesy light for different purposes.
- 60w power amplifier: Even if the yellow and white wires are not used or activated, the module can serve as power amplifier. The lights will get main power from the red & black wires of the module and only draw a small amount of power
from XKchrome controller as control signal, which enables larger scale installation that exceeds the 72w output of XKchrome controller.
*** Select “Add 2 turn signal modules” above ADD TO CART button to add to order.
Check out one of our professional installers near you! Click Here!
*DISCLAIMER – PLEASE READ BEFORE PURCHASING*
Under no circumstances will Automotive Custom Lighting be liable for any damages, direct or indirect, consequential or compensatory, arising out of the use of
this product. Our products are fully tested for the intended use described above. Any issues, damages, injuries, or malfunctions resulting from user-error or during
use or installation will not be warrantied or covered by any means under Automotive Custom Lighting LLC. With the purchase any of our products you hereby understand
and agree to these terms.